A Game-Changer from UBC Okanagan: The Lightweight Wearable Brace

Researchers at the University of British Columbia Okanagan (UBCO) have made significant strides in addressing one of the most debilitating symptoms of neurological disorders: hand tremors. Led by Dr. Hadi Mohammadi, a professor in UBCO's School of Engineering, and Dr. Dylan Goode, the lab manager at the Heart Valve Performance Laboratory, the team has developed a novel passive wearable brace designed to suppress involuntary hand shaking. This device stands out for its simplicity and effectiveness, offering a non-invasive alternative to traditional treatments like medication or surgery.

The brace, weighing just 330 grams, uses a smart mechanical design featuring tuned mass damping with magnets and springs. It targets the typical frequency range of tremors—3 to 7 Hz—absorbing rapid involuntary oscillations while allowing normal voluntary movements to pass through unimpeded. In laboratory tests using a mannequin arm equipped with a tremor simulator, the brace achieved remarkable results: up to 79% reduction in unidirectional tremors and 73% overall in omnidirectional shaking.

How the Technology Works: A Step-by-Step Breakdown

The ingenuity of this UBC Okanagan tremor brace lies in its passive operation, eliminating the need for batteries, motors, or electronics that plague many existing wearables. Here's how it functions step by step:

• Tremor Detection via Frequency Tuning: Tremors produce high-frequency, low-amplitude waves (3-7 Hz). The brace's absorbers are precisely tuned to resonate at these frequencies, capturing the unwanted motion.
• Opposing Force Generation: Magnets paired with springs create an counter-wave that opposes the tremor motion, much like noise-cancelling headphones for sound waves. This mechanical interference cancels out the shaking.
• Omnidirectional Suppression: A compact, donut-shaped orthosis integrates dual perpendicular absorbers, handling tremors from multiple directions simultaneously without restricting wrist or finger mobility.
• Preservation of Voluntary Movement: Low-frequency intentional actions (e.g., reaching for a cup) are not damped, ensuring the brace feels natural during daily tasks.

This design was optimized using MATLAB simulations and validated experimentally, showcasing UBCO's expertise in computational biomechanics.

Lab Results and Rigorous Testing Methodology

The breakthrough was detailed in a study published in the Journal of Medical Engineering & Technology, authored by master's student Manthan Shah, Dr. Goode, and Dr. Mohammadi. Testing involved a full-scale mannequin arm simulating real tremors, with metrics measured across the clinical frequency spectrum. Key outcomes include:

These figures surpass many active devices, highlighting the potential of passive engineering solutions. The research builds on prior work from 2022, evolving from computational models to physical prototypes.

The Team Behind the Innovation at UBC Okanagan

Dr. Hadi Mohammadi's Heart Valve Performance Laboratory at UBCO has been at the forefront since 2018, focusing on patient-centered mechanical solutions for movement disorders. Funded by Health Research BC and Mitacs, the project involved collaboration with Summit Innovation Ltd. Dr. Dylan Goode emphasized practicality: "Our goal was to develop a solution that is effective, wearable, and practical for everyday use." Master's student Manthan Shah's thesis formed the foundation, demonstrating how graduate research drives real-world impact at Canadian universities.

UBC Okanagan's School of Engineering fosters such interdisciplinary work, blending mechanical engineering with biomedical applications to tackle health challenges.

Hand Tremors in Canada: A Growing Public Health Concern

Hand tremors affect millions globally, but in Canada, the burden is significant. Parkinson's disease (PD), a primary cause, impacts over 120,000 Canadians, with projections exceeding 150,000 by 2034. Essential tremor (ET), the most common movement disorder, affects 4-5% of adults over 40. These conditions disrupt eating, writing, and self-care, leading to reduced independence and psychological strain. In British Columbia alone, parkinsonism prevalence among those over 40 is around 530 per 100,000, disproportionately affecting men.Parkinson Canada statistics underscore the urgency for accessible interventions.

UBC Okanagan's Leadership in Biomedical Engineering Research

UBC Okanagan, part of Canada's top-ranked university system (UBC #34 globally, QS 2026), excels in engineering and health sciences. The School of Engineering ranks highly in Canada for innovation, with strengths in biomedical devices. This tremor brace exemplifies UBCO's patient-focused approach, complementing broader UBC efforts like the new biomedical engineering facility—the first in Canada. Such research positions UBCO as a hub for medtech, attracting funding and talent to the Okanagan region.

Comparing the Brace to Existing Tremor Treatments

• Medications: Beta-blockers or anticonvulsants offer partial relief but cause side effects like fatigue.
• Surgery (DBS): Deep brain stimulation is invasive and costly (~$50,000+ CAD).
• Other Wearables: Devices like Cala Trio use stimulation but require charging and are bulky.
• UBCO Brace Advantages: Passive, lightweight (330g), affordable potential, no power needs, multi-axis suppression.

This positions the brace as a practical complement or alternative, especially for early-stage patients.

Next Steps: From Lab to Clinic and Beyond

The team plans human clinical trials to assess comfort, long-term efficacy, and daily function impacts. Health Canada approval could enable market availability within a year. Commercialization via partners like Summit Innovation may make it accessible across Canada. Dr. Mohammadi notes: "This work represents a meaningful step toward improving functional independence." Success could spur similar innovations at other Canadian universities.

Broader Impacts on Canadian Higher Education and Health Innovation

This breakthrough highlights Canadian universities' role in translational research, bridging engineering and neurology. UBCO's model—integrating students like Manthan Shah—inspires programs nationwide. It addresses aging demographics, with PD cases rising 69% by 2050 globally, mirroring Canada. Opportunities abound for biomedical engineers, with demand for research jobs surging.

Similar efforts at Western University (tremor gloves) and UBC Vancouver (ultrasound for PD) show a national ecosystem fostering medtech careers.

Career Opportunities in Biomedical Engineering at Canadian Universities

The tremor brace project underscores exciting prospects in biomedical engineering. Roles span from PhD research to prototyping, with salaries averaging $90,000-$120,000 CAD for engineers. UBCO offers programs blending mechanics and health, preparing graduates for industry or academia. Explore research jobs or faculty positions to contribute to such innovations.

Photo by Tom Claes on Unsplash

Future Outlook: Transforming Lives Through University Research

As clinical trials progress, UBC Okanagan's tremor brace could restore dignity and independence for tremor sufferers. It exemplifies how Canadian higher education drives solutions to real-world challenges, positioning universities like UBCO as leaders in health tech. Stay tuned for updates on this promising development.

For the full study, see the Journal of Medical Engineering & Technology publication.