Adjunct (post-doc)

Offer Description

Adjunct (post-doc), full-time position, 40 hours per week, on-site, in a group of researchers at the Department of Chemistry and Metal Corrosion, within the project entitled: "3D-printed bone implants - exploring the relationship between the chemical and spatial structure of implants and their surface, mechanical, osteogenic and anticancer properties", project no. 2023/49/B/ST4/00077, funded under the OPUS-25 call.

Scope of duties (full-time, on-site post-doctoral position):

1. Synthesis of metallic nanostructures (both bare and surface-functionalized),
2. Optimization of materials intended for the fabrication of three-dimensional bone scaffold models,
3. Design and fabrication (3D printing) of three-dimensional bone scaffold models,
4. Preparation of samples for physicochemical and mechanical testing,
5. Conducting mechanical testing of materials and synthetic bone scaffolds,
6. Performing spectroscopic analyses of the surfaces of materials (bare and functionalized) and synthetic bone scaffolds,
7. Evaluation of wear of materials (bare and functionalized) and synthetic bone scaffolds,
8. Analysis and interpretation of research results,
9. Preparation of scientific publications and project reports,
10. Preparation of monthly reports on the progress of research and scientific activities.

Where to apply

E-mail: proniewi@agh.edu.pl

Requirements

• Chemistry » Biochemistry — PhD or equivalent
• Chemistry » Physical chemistry — PhD or equivalent
• Chemistry » Structural chemistry — PhD or equivalent
• Computer science » 3 D modelling — PhD or equivalent
• Engineering » Biomedical engineering — PhD or equivalent
• Engineering » Biomaterial engineering — PhD or equivalent
• Engineering » Chemical engineering — PhD or equivalent
• Technology » Biotechnology — PhD or equivalent
• Technology » Interface technology — PhD or equivalent
• Technology » Nanotechnology — PhD or equivalent
• Technology » Medical technology — PhD or equivalent
• Physics » Surface physics — PhD or equivalent
• Physics » Chemical physics — PhD or equivalent
• Physics » Biophysics — PhD or equivalent

Skills/Qualifications

• Managed research projects, including acquisition, planning, and implementation.
• Conducted laboratory work in 3D printing, polymers, composites, and nanomaterials synthesis.
• Performed Raman, SERS, IR, and UV-Vis spectroscopy experiments; analyzed molecular spectroscopy data for surface studies.
• Carried out materials characterization, including wear studies, porosity analysis, and mechanical testing.
• Communicated effectively in English, both written and spoken, B2 level.
• Collaborated in team-based research environments, contributing to scientific studies and problem-solving.

Languages

ENGLISH — Level: Good

Research Field

Engineering » Biomaterial engineering; Engineering » Biomedical engineering; Engineering » Chemical engineering; Chemistry » Biochemistry; Chemistry » Physical chemistry; Chemistry » Structural chemistry; Computer science » 3 D modelling; Technology » Biotechnology; Technology » Interface technology; Technology » Nanotechnology; Technology » Medical technology; Physics » Surface physics; Physics » Chemical physics; Physics » Biophysics

Years of Research Experience

1 - 4

Additional Information

Selection process

A committee chaired by the project director will select the postdoctoral fellow based on submitted documents and an interview.

Additional comments

Requirements:REQUIREMENTS:

1. the candidate must hold a doctoral degree in one of the following disciplines: Chemical Sciences, Physical Sciences, Materials Engineering, Chemical Engineering, or Biomedical Engineering, awarded no earlier than 7 years prior to the year of employment in the project (taking into account the career breaks specified in the definition of a post-doc position in the Regulations on Awarding Funding for Research Tasks Funded by the National Science Centre for research projects, post-doctoral fellowships, and doctoral scholarships, hereinafter referred to as the "Regulations").
2. the candidate applying for the post-doctoral position must have obtained their doctoral degree from an institution other than the one where employment is planned, or must have completed at least a 10-month continuous and documented post-doctoral fellowship at an institution other than the host institution of the project and in a country different from the country where the doctoral degree was obtained.
3. during the period of receiving this remuneration, the candidate shall not receive any other salary from funds allocated as direct costs in research projects financed under NCN calls.
4. during the period of receiving this remuneration, the candidate shall not be employed by another employer under an employment contract, including employers based outside Poland; AGH University of Krakow shall constitute the candidate's sole place of employment.
5. the candidate should demonstrate scientific achievements in Chemical Sciences, Physical Sciences, Materials Engineering, Chemical Engineering, or Biomedical Engineering, documented by publications in international peer-reviewed journals, research stays, fellowships, awards, certificates, or participation in workshops/conferences/projects, etc.
6. experience in laboratory work involving 3D printing, polymers, composites, molecular spectroscopy for surface analysis, or mechanical testing.
7. experience in acquiring, managing, or implementing research projects will be considered an advantage.
8. good command of Microsoft Office and data/spectra processing software packages.
9. proficiency in English, both spoken and written, at a minimum level of B2.
10. ability to conduct scientific research and work effectively in a research team, as well as a high level of personal integrity and professionalism in professional relationships.

DOCUMENTS REQUIRED:

1. application letter, Curriculum Vitae, and personal questionnaire (application form), and other documents confirming acquired qualifications and skills;
2. document confirming proficiency in English at a minimum level of B2;
3. doctoral diploma or a certified copy thereof, a resolution on the award of the doctoral degree, or another official document confirming the award of the doctoral degree;
4. a declaration stating that AGH University of Krakow will constitute the candidate's sole place of employment in the case of full-time employment, on-site work;
5. a declaration of compliance with Article 113 of the Act of 20 July 2018 – Law on Higher Education and Science (Journal of Laws 2023, item 742, as amended);
6. the candidate's declaration of consent to the processing of personal data pursuant to Article 6(1)(a) of Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation – GDPR).

We offer the following:

1. career development opportunities at one of the leading technical universities in Poland,
2. ideal conditions for conducting research, teaching, and cooperating with academia and industry,
3. salary not lower than 7300 PLN gross per month.

The competition is conducted in accordance with the principles of the OTM-R Policy, and the recruitment process takes into account the European Charter for Researchers, the Gender Equality Plan at the AGH University, the Principle of Equal Treatment, and the Accessibility Policy. Please also be informed that the AGH University of Krakow has in place the Procedure for Reporting Breaches of Law and Taking Follow-Up Actions.

The aforementioned documents, as well as the following:

• a detailed description of the professional development path and career prospects;
• information on employment conditions and employee rights (including social and employee benefits);
• detailed information on the objective assessment criteria, taking into account the qualifications and competences of candidates;

can be found on the website: https://hrs4r.agh.edu.pl/

The recruitment procedure is divided into two stages:

1. formal assessment – assessment of the completeness of the application documents and compliance with the requirements specified in the Act, the AGH University Statute, and the competition announcement,
2. substantive assessment – an objective and merit-based assessment of applications submitted by candidates who have successfully passed the previous stage; interviews with candidates may be conducted at this stage (either in person or remotely).

The candidate has the right to appeal against the competition results within 5 working days after receiving the notification.

In case of any questions regarding the competition and the recruitment process, contact: Prof. Edyta Proniewicz, PhD, DSc, proniewi@agh.edu.pl.

To be considered a candidate you must meet the following requirements set out in the Act:

1. you hold the qualifications defined in the Act,
2. you have full capacity for juridical acts,
3. you have not been convicted for an intentional offence,
4. you enjoy full public rights.

The AGH University of Krakow does not require you to provide any information or data other than those resulting from the applicable law (name/names, surname, date of birth, contact details, education, professional qualifications, and employment history). However, if you choose to include your photograph or any other information, please fill in and attach this statement of consent to the processing of personal data, which constitutes an attachment to this information.

The controller of your personal data processed in order to carry out the recruitment process for the above-mentioned position is the AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow. You can read all information concerning the processing of your personal data on the website of the AGH University of Krakow after going to the "Personal data protection" tab (https://www.agh.edu.pl/en/personal-data-protection).

The University reserves the right not to settle the competition without providing any reason or justification. Winning the competition is not tantamount to ensuring the candidate's employment. The result of the competition serves solely as a recommendation to the Rector in this regard. The final decision concerning the employment will be made by the Rector.

Website for additional job details: https://www.agh.edu.pl/o-agh/praca-w-agh

Work Location(s)

• Number of offers available: 1
• Company/Institute: AGH University of Krakow, Faculty of Foundry Engineering
• Country: Poland
• City: Krakow
• Postal Code: 30-059
• Street: ul. Reymonta 23

Contact

• State/Province: Malopolska
• City: Krakow
• Website: https://www.agh.edu.pl/o-agh/praca-w-agh
• Street: al. Mickiewicza 30
• Postal Code: 30-059
• E-Mail: proniewi@agh.edu.pl
• Phone: (+48) 12-617-3496