About the Project This project is one of a number in competition for a studentship from the Faculty of Engineering
and Design at the University of Bath. If successful, this studentship is expected to commence 04 October 2027. An alternative start date may be possible if agreed with your intended supervisors and the Doctoral College. Project Background: This project will develop novel methods for fabricating layered ferroelectric architectures with exceptional multifunctional properties for sensing, energy harvesting and storage. Layered architectures will be designed to enhance functionality beyond the state-of-the-art, while the methods used to make them will reduce their embedded energy via significant reductions in either time or temperature of the sintering stage. Layered ferroelectric ceramic architectures are widely used in industry as sensors, medical ultrasonics, and multilayer ceramic capacitors but are currently constrained by the manufacturing process in which all constituent materials and layers are co-fired. This limits the possible material combinations, restricting performance and increasing cost as, e.g., cheaper electrode materials cannot be used due to unwanted chemical reactions. Finding a solution to this challenge will not only improve existing materials and devices, but also open opportunities to create new multifunctional composites, e.g. magnetoelectric composites for wireless charging of medical implants. The project will utilise two low energy sintering techniques that have emerged in recent years. Firstly, the recently discovered blacklight sintering process [1], which exploits optical absorption of light at the surface of materials to produce the heat necessary to sinter (densify) ceramics, will be explored as a method of rapidly sintering sequential layers of material without degrading or reacting with the preceding layer. Secondly, cold sintering [2] will be used as a relatively low temperature method – sintering at below 300 deg.C (compared to >1000 deg.C in conventional sintering) is achieved by introducing a liquid flux and moderate pressure to facilitate mass transport. Here materials will very different thermal behaviour can be co-processed, e.g. ceramics, metals and polymers, providing an avenue to create functional composite structures unobtainable with conventional methods. Both experimental and modelling work is required to further our understanding of the fundamental sintering mechanics and the structure-property relationships across length scales. This project could be tailored depending on the experience and skillset of the successful candidate. The research group has experience in combining these and the student will be supported to learn complementary modelling or experimental techniques throughout the project. Candidate requirements: Applicants must have, or be about to obtain, a UK Honours degree 1st or 2.1, or international equivalent. A master’s level qualification would also be advantageous in Engineering, Materials Science, Physics, Chemistry or related discipline. Non-UK applicants, who are not currently studying in the UK, must meet the programme’s English language requirement before the application deadline – no exceptions will be considered. Informal enquiries are encouraged. Direct these to Dr James Roscow - Jir24@bath.ac.uk Please follow the below instructions carefully. You must make a formal application via the University of Bath’s online application form for a PhD in Mechanical Engineering Please note that you can apply for a maximum of two PhD projects on this programme. In the ‘Funding Your Studies’ section, you must select ‘University of Bath URSA’ from one of the drop-down menus. In the ‘Your PhD project’ section, you must quote the project title in the PhD project title field, and you must quote the lead supervisor’s name in the field ‘Name of intended supervisor at University of Bath.’ If you are applying for two projects, you must quote the project title for your second choice project in the field ‘Project 2 Title’ and the lead supervisor’s name in ‘Name of intended supervisor for 2nd choice project at University of Bath. You must ensure that you follow the above steps correctly. Failure to complete these steps will cause errors in the automated processing of your application and may mean that you are not considered for a particular project. Equality, Diversity and Inclusion We value a diverse research environment and strive to be an inclusive university, where difference is celebrated and respected. We encourage applications from under-represented groups. If you have circumstances that you feel we should be aware of that have affected your educational attainment, then please feel free to tell us about it in your application form. The best way to do this is a short paragraph at the end of your personal statement. The Disability Service ensures that individuals with disabilities are provided the support that they need. If you state if your application that you have a disability, the Disability Service will contact you as part of this process to discuss your needs. Keywords Smart materials, ceramics, piezoelectrics, dielectrics, processing Funding Notes Applicants will be considered for a studentship. The Faculty of Engineering and Design at the University of Bath has studentships available for Home and Overseas students. However, in line with UKRI policy, the number of studentships available to Overseas students are capped. Studentships cover tuition fees, provide a £1k per annum training support fee, and a maintenance stipend (£21,805 2026/27 rate). International students will be required to cover the cost of a Student visa and Immigration Health Surcharge from personal funds. References [1] Porz et al., Mater. Horiz. (2022) 9 (6): 1717–1726 [2] Singh, Roscow et al., Ceram. Int. (2026) 52 (21): 37719–37733


