Electrical Engineer

assemble, test, install, and operate unique research equipment to generate, transport, transfer, accelerate and focus electron and X-ray beams. This includes a combination of custom designed and built parts and vendor produced components developed by a collaboration of the NSLSII scientific, engineering, and technical staff. The NSLSII supports an international user community of over 2,200 researchers from 400 universities. The NSLSII performs all these functions in an environmentally responsible and safe manner, under a rigorous conduct of operations approach. Position Description NSLS-II Diagnostics and Instrumentation Group has an opening for an Electrical Engineering (P5) position. Reporting to the diagnostics group leader, the candidate will perform duties of an Engineer for the maintenance, upgrade, and testing, of diagnostics sub-systems in support of NSLS-II accelerator operations. This position will require close interaction with technicians, engineers and scientific staff. A main task will be to maintain the Beam Position Monitor (BPM) system, as well as providing support for various Diagnostics sub-systems, and special projects including development of next generation diagnostics systems, critical to accelerator operations, and will require ability to identify modes of failure and mitigate corrective action. Tasking will also include provision of engineering support for firmware, software and hardware development, as well as supporting work for others initiatives. Essential Duties and Responsibilities: Provide engineering support for all aspects of accelerator beam position monitors and other beam diagnostics instrumentation. Work with high level software programmers to develop support code and applications Interface with technical experts from other groups to facilitate operations Work with other engineers and technicians to achieve group goals Debug and maintain the repair of existing hardware Work planning in preparation for scheduled maintenance and shut-down activities Maintain and implement safety practices and procedures applicable to daily activities Required Knowledge, Skills, and Abilities: BSEE in Electrical Engineering or related Minimum of 3-5 years experience with design, fabrication, integration, and implementation of electronics systems Experience with FPGA Firmware, development, VHDL or Verilog Knowledge of at least one higher level programming language (Python, C++, Matlab, etc) Working knowledge for design and implementation of digital and analog circuits Use of test and measurement equipment, including oscilloscope, network, spectrum and logic analyzers, signal generators, AWG Must be able to work from schematics, diagrams, written procedures, spreadsheets, controls interface documents Hands-on troubleshooting skills Experience processing test records and inspection reports Must be willing to accommodate the operational requirements of the division including response to calls off-hours to support accelerator facility 24/7. Preferred Knowledge, Skills, and Abilities: Masters of Science in Electrical Engineering (MSEE) Able to use Xilinx ISE, Xilinx Vivado, Altera Quartus, or similar tool suites Ability to develop sub-system test strategies and system readiness procedures Knowledge of PLC based sub-systems applications Experience using PADS PCB layout, PADS Logic and dxDesigner schematic capture, OrCAD capture, p-Spice A/D, LabView, Visio, as well as autodesk products. Experience using FPGA IP cores Xilinx ZYNQ experience Some knowledge of Fiber Optic data transceivers Some knowledge of serial device communication (RS-232, RS-485, ModBus) Some knowledge of GPIB communication Comfortable with LINUX Familiarity with the "Experimental Physics and Industrial Control" (EPICS) software Familiarity with the CS-Studio/Phoebus control system studio Familiarity with revision control Environmental, Health & Safety Requirements: Must be safety-conscious and able to follow detailed written procedures Lifting up to 30 pounds. Continuous walking/standing, Climb a ladder and work at heights up to 10 feet. Other Information: This is an onsite position. The candidate must be legally authorized to work in the U.S. Brookhaven National Laboratory is committed to providing fair, equitable and competitive compensation. This is a multi-level role and the full salary range for this position is $XXXXX - $XXXXXX / year. You will be placed at the level and salary commensurate with your experience. Salary offers will be commensurate with the final candidate's qualification, education and experience and considered with the internal peer group. Brookhaven National Laboratory is committed to employee success and we believe that a comprehensive employee benefits program is an important and meaningful part of the compensation employees receive. Review more information at BNL | Benefits Program Brookhaven National Laboratory requires all non-badged personnel including visitors to produce a REAL-ID or REAL-ID compliant documentation to access Brookhaven National Laboratory - view more information at www.bnl.gov/real-id . This is due to nationwide identification requirements for federal site access as required by the federal REAL ID Act . Those not in possession of a REAL ID-compliant document will not be permitted to access the site which includes access to the Laboratory for interviews . As a U.S. Department of Energy laboratory, Brookhaven National Laboratory requires employees to obtain and maintain a DOE Uncleared Personal Identity Verification (UPIV) credential in accordance with Homeland Security Presidential Directive 12 (HSPD-12) requirements. The credentialing process is completed as part of onboarding and enables access to DOE facilities and information systems. As a condition of employment, the selected candidate must be able to obtain and maintain a UPIV credential. These requirements are established under DOE Order 206.2 Chg. 2, Identity, Credential, and Access Management (ICAM- Identity, Credential, and Access Management (ICAM) ) , and DOE Order 473.1A- Physical Protection Program- Physical Protection Program . About Us Brookhaven National Laboratory (www.bnl.gov) delivers discovery science and transformative technology to power and secure the nation's future. Brookhaven Lab is a multidisciplinary laboratory with seven Nobel Prize-winning discoveries, 37 R&D 100 Awards, and more than 70 years of pioneering research. The Lab is primarily supported by the U.S. Department of Energy's (DOE) Office of Science. Brookhaven Science Associates (BSA) operates and manages the Laboratory for DOE. BSA is a partnership between Battelle and The Research Foundation for the State University of New York on behalf of Stony Brook University. BSA salutes our veterans and active military members with careers that leverage the skills and unique experience they gained while serving our country, learn more at BNL | Opportunities for Veterans at Brookhaven National Laboratory . Equal Opportunity/Affirmative Action Employer Guided by our core values of integrity, responsibility, innovation, respect, and teamwork, Brookhaven Science Associates is an Equal Employment Opportunity Employer-Vets/Disabled. We are committed to fostering a respectful and collaborative environment that fuels scientific discovery. We consider all qualified applicants without regard to any characteristic protected by law. All qualified individuals are encouraged to apply. We ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. *VEVRAA Federal Contractor BSA employees are subject to restrictions related to participation in Foreign Government Talent Recruitment Programs, as defined and detailed in United States Department of Energy Order 486.1A. You will be asked to disclose any such participation at the time of hire for review by Brookhaven. The full text of the Order may be found at: https://www.directives.doe.gov/directives-documents/400-series/0486.1-BOrder-a/@@images/file