Job Category: Fulltime Regular
Exempt/Overtime Eligible: Exempt
Benefits Eligible: Benefit Based
Job Summary
The Quantum Photonics Group (led by Principal Investigator (PI) Oskar Painter) is seeking an Equipment Engineer, Dry Etch to assist in the day-to-day technical operations of its cleanroom facilities on the Caltech campus. The QPG Equipment Engineer will take an important role in maintaining peak performance of state-of-the-art nanofabrication equipment, which includes material deposition systems (e.g. plasma enhanced chemical vapor deposition, atomic layer deposition, physical vapor deposition), material etching systems (e.g. reactive ion etchers, vapor HF), a scanning electron microscope, fume hoods for wet chemistry, and other supporting tools; responsibilities for equipment will be shared with other technicians and a process engineer, with whom the QPG Equipment Engineer will work closely. The QPG Equipment Engineer will be expected to take ownership of equipment by both learning how to operate it at peak performance and by administering the types of maintenance and alignments that keep it dialed in to peak performance for use by the lab’s quantum device researchers. When repairs are needed, the successful candidate will be able to combine problem-solving skills with mechanical, electrical, and vacuum system know-how to return equipment to optimal working order, then document the solutions to make future repairs. The QPG Equipment Engineer will carry out test protocols and preventative maintenance plans that minimize the chance of equipment failure, thereby maximizing its uptime for the lab’s researchers. The successful candidate will become an expert in equipment operation to the point of being able to train lab users to also expertly operate the equipment. Overall, the QPG Equipment Engineer will be expected to contribute to the lab culture and capabilities and strive to meet the high standards necessary to run a world-class research operation.
Essential Job Duties
Equipment operation and maintenance:
- Perform routine inspection, preventive maintenance, calibration, and troubleshooting of mechanical, electrical, and vacuum systems for semiconductor nanofabrication equipment, along with other integrated systems for gas delivery, motion control, etc.
- Follow established methods to monitor equipment performance and operating parameters, including performing daily checklists and routine process qualifying runs, in order to ensure equipment is operating at peak performance.
Troubleshooting and technical support:
- Respond quickly to equipment failures, system alarms, downtime, and operational issues. Establish response procedures to reduce downtime and improve efficiency.
- Perform repairs and diagnosis by reading through equipment and utility schematics, soliciting advice from vendors, and formally communicating with other team members.
- For repairs that rise to the level of needing attention from vendor service people (most equipment will be covered under service contract), first coordinate the service, then follow through until the service is complete. This includes documenting the service visit and formally communicating results to the other team members.
Preventive maintenance and reliability improvement:
- Formally develop and execute preventative maintenance plans for equipment to keep performance at the established, high standard.
- Monitor performance indicators to continuously improve equipment reliability while reducing maintenance costs.
- Lead in formally creating, updating, and maintaining equipment troubleshooting documents that can be used to address commonly encountered problems.
- Help to maintain, upgrade, and back up computer systems in the lab (e.g., computers for individual instruments, login terminals, and new computer networking projects).
Equipment installation and continuous improvement:
- Participate in the planning, installation, commissioning, testing, and acceptance of new equipment, then formally establish operational protocols and maintenance plans for such equipment.
Documentation and training:
- Help maintain organized data records that can be used to verify performance and indicate when maintenance and/or alignments of equipment components are necessary.
- Develop standard operating procedures, maintenance documentation, and emergency response procedures.
- Provide technical training and guidance to operations and maintenance personnel on the proper operation and maintenance.
Basic Qualifications
- Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Electrical Engineering, or related scientific discipline.
- 2+ years of technical hands-on experience in semiconductor equipment operation, maintenance, repair, and installation.
- A high level of craftsmanship and a thorough knowledge of mechanical design, materials, tools, units, and basic measurement techniques.
- Attention to detail and excellent problem-solving and debugging skills.
- Willingness to formally maintain highly organized data records.
- An ability to learn quickly and adequately transfer that knowledge to others through teaching/formal documentation.
- A desire to meet – and set – high standards.
- Ability to work independently, with a high level of responsibility.
- Strong communication skills with the supervisor, vendors, and lab users.
- Teamwork skills and an ability to collaborate with coworkers having diverse skills and backgrounds.
- On-site during peak hours (8am-5pm, Monday through Friday), with the ability to work early mornings, evenings, and weekends, when necessary.
- Proficiency with the following software: Excel, Word, Outlook, and PowerPoint.
- Basic computer maintenance and troubleshooting skills, e.g., new hardware installs, networking, performing hard drive backups.
- Must be able to work in a cleanroom setting, following all established protocols for gowning, PPE, and safety.
- Ability to lift up to 20 lbs.
- Ability to perform other duties and ad hoc tasks as assigned, which may not be explicitly listed above but are consistent with the general scope and responsibilities of this position.
Preferred Qualifications
- 3+ years in Dry etch (strongly preferred), Metrology, Lithography, and/or Wet Process experience.
- Experience working with Autocad, Solidworks.
- Experience working with UHV vacuum systems and leak detection.
- Experience with project engineering or project management is a plus.
Required Documents
- Resume
Hiring Range
Hiring Range: $78,000 - $111,500 Per Year
The salary of the finalist(s) selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty and training.
As one of the largest employers in Pasadena, CA, Caltech is committed to providing comprehensive benefits to eligible employees and their eligible dependents. Our benefits package includes competitive compensation, health, dental, and vision insurance, retirement savings plans, generous paid time off (vacation, holidays, sick time, parental leave, bereavement, etc.), tuition reimbursement, and more. Non-benefit eligible employees will have access to some benefits such as onsite counseling and sick time. Learn more about our benefits and staff perks.