Plumber

Department

Plumbing Shop

Category

Building Trades and Technicians

Job Type

Full-Time

Overview

Plans and performs journeyman level work to inspect, maintain, repair, modify, and install University plumbing, heating, water, gas, utility, drainage and other related systems. Follows university rules and regulations at all times, along with established safety procedures.

The incumbent in this position will work on a Monday – Friday, 1:00 pm – 9:30 pm shift schedule.

The Plumbing Shop personnel are members of Local 175 of the Service Employees International Union (SEIU).

Responsibilities

With minimal supervision, the incumbent shall perform the following duties and responsibilities. Other duties may be assigned.

• Perform all facets of the plumbing and heating trade in accordance with the National Standard Plumbing Code in a safe and effective manner. Investigates problems with plumbing systems, evaluates alternate solutions and provides sound recommendations to supervisors. In emergency situations, takes immediate steps to contain the problem and to restore the system to good operating order. Examples of this work include, but are not limited to the following:
  • Assembles, installs and repairs plumbing fixtures such as sinks, commodes, bathtubs, water heaters, hot water tanks, and dishwashers.
  • Assembles and installs valves, pipe fittings and pipes composed of metals such as iron, and steel, and plastic. Cuts and threads pipe. Joins pipes by the use of screwed, bolted, soldered, caulked or plastic solvent joints.
  • Installs, repairs, modifies and maintains gas fired residential heating systems.
  • Pressure tests piping systems to insure there are no leaks and that all system components are operating properly.
  • Maintains, troubleshoots, tests and inspects backflow prevention devices.
• Maintains current knowledge of the National Standard Plumbing Code and other applicable building codes.
• Reads, understands and interprets construction related documents (drawings, submittals, technical manuals and specifications) in order to determine equipment and materials required or appropriate methods of installation.
• Ensures proper care in the safe use and maintenance of vehicles, tools and equipment.
• Maintains records of corrective and preventive work assignments received through an automated work order system (Maximo).
• Assists other trades personnel in work projects or special assignments.
• Responds to emergency call-ins on campus and for emergency after hours work as needed.
• Communicates clearly and effectively, both verbally and in writing.
• Performs other duties as assigned.

Qualifications

To perform this job successfully, an individual must be able to perform the essential duties and responsibilities in a satisfactory manner. The requirements listed below are representative of the knowledge, skill, and/or ability required:

• Must have significant journey level plumbing experience, along with the trade knowledge to effectively understand and perform all facets of the plumbing trade in accordance with the National Standard Plumbing Code and other applicable codes.
• Must have strong background in residential/small commercial heating (installations, boiler repair, gas furnaces, etc.)
• Must possess high school diploma or an equivalency (GED)
• Must be able to investigate routine and emergency problems with plumbing and heating systems, evaluate alternative solutions and provide sound recommendations to supervisors. Must be able to safely and effectively carry out corrective actions.
• Must be able to read and interpret construction drawings, specifications, submittals, cut sheets, layouts and other plumbing trade related documentation.
• Must be able to properly and safely use the tools of the trade and carry out all tasks expected of a plumber.
• Must have an excellent ability to work both independently and with other trades personnel and customers.
• Must be available for after hours and emergency call back work, which may involve the carrying of a cell phone.
• Must be able to clearly and effectively communicate, both verbal and written.
• Must have a valid driver's license and be able to pass a background check.
• Must be able to meet the physical requirements listed below.

Preferred Qualifications:

• Certification as a Licensed Master Plumber in the State of New Jersey.
• Completion of a State recognized four-year apprentice training program in plumbing.

Physical Requirements

Stand or walk up to 2 hours at one time, up to 8 hours per day; Sit for less than 2 hours during an 8 hour day; Operates motor vehicles or heavy equipment (e.g., forklift, high reach, cherry picker) occasionally (less than 33% of the workday) Lift or carry up to 35 pounds frequently (34 – 66% of the workday) and 100 pounds occasionally (less than 33% of the workday); Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead: Frequently use hands for simple grasping, fine manipulation, pushing or pulling (34 – 66% of the workday); Occasionally climb stairs or ladders, dig, use jack hammer or chipping tools, lie down, push or pull with forces up to 100 pounds (less than 33% of the work day); Frequently bend, squat, kneel, knee stand, lift overheard, reach overhead, push or pull with forces up to 35 pounds; (34 – 66% of the work day); Work outdoors in a variety of temperatures and environmental conditions; Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance.

Standard Weekly Hours

40.00

Eligible for Overtime

Yes

Benefits Eligible

Yes

Probationary Period

Per union contract

Essential Services Personnel (see policy for detail)

Yes

Physical Capacity Exam Required

Yes

Valid Drivers License Required

Yes

Salary Range

$37.05 Minimum Hourly Rate